The cost of a new bathtub is only a few hundred dollars. However with further investigation you will quickly realize the tub cost is inconsequential when it comes to the process of actually getting the bathtub to working condition.
This is primarily due to the fact that when homes are built the bathtub is installed before the finish carpentry is completed. This means when they are originally installed walls and doors have not been constructed yet. So they are able to place the bathtub into the location, install the tile and connect the plumbing.
When replacing a bathtub it is not unusual to have to widen doors and / or remove windows to get the old bathtub out and the new bathtub in.
This is why high quality bathtub refinishing is the best option when it comes to worn, discolored or damaged bathtubs. We put a factory like surface back on to the original bathtub surface. This new surface is integrated into the old surface and in the case of Dallas Bathtub Services we back the work with an 8 year transferable warranty that will prove to be very valuable just in case any trouble should occur.
Please take a minute to see my Price List and Contact Information.
Dallas bathtub services has produced a site dedicated to educating consumers not only in the Dallas,TX. area but throughout the entire United States. James Calhoon wants to help the consumer find quality refinishing technicians preferably owner operated professionals and will be adding new companies information to this page in the coming days! "I am excited to help rid the black cloud hanging over the refinishing Industry". Mr. Calhoon stated. It will all start right here with Dallas Bathtub Services!
Ask.com writes : "Most consumers are purchasing bathtub painting mistaking it for bathtub refinishing. My new updated website helps educate consumers. Dallas Bathtub Services is helping to educate the consumer".
DALLAS & MESQUITE, Texas -- Dallas Bathtub Services explains the differences between bathtub refinishing, also called resurfacing or reglazing and bathtub painting. "Using my new updated website to educate consumers about bathtub, shower, tile and sink refinishing in Dallas, Texas". Explains James Calhoon.
Dallas Bathtub refinishing is the process of integrating a new surface into the old surface. This surface needs to replicate the look and feel of porcelain when it comes to bathtubs, tile and showers. There is a synergistic process to achieve this and it absolutely does not involve inferior painting that is going to peel.
James Calhoon should know he will humbly explain "In 1991 when I started Dallas Bathtub Services the only thing I knew of was Epoxy. I trained with it and used it daily for years in Apartments and Hotels" Mr. Calhoon goes on the explain, "They wanted quick and they wanted pretty good and they were fine with having it redone again after the lease was up in 6 months".
James Calhoon clarifies "Dallas Bathtub Services refinishing is not rocket science, however it does borrow some technology developed by the Aerospace industry". Silane is a molecular bonding agent. There are many qualities of Silane from the type used to paint plastic to the highest quality used for high altitude aircraft and space equipment. Silane is part of the synergistic process for refinishing. Equally important is the etching process, which I personally accomplish with spun fiber disk operating at about 2000 RPM. This opens the pores in the old surface and creates microscopic scratches in the old surface.
Silane is then worked into these pores and scratches allowing the new polymer surface being applied to become chemically welded into the old surface. Please know many other factors go into the successful refinishing procedure. Quality material and knowledge of how these materials react to the surface, humidity and temperature are part of the process.
We look forward to updated content as more outlets pick up the articles by Dallas Bathtub Services
News articles, information and pricing for Dallas Bathtub Services.