Bathtub Refinishing and Resurfacing In Dallas TX
Quick note about my process!
Dallas Bathtub Refinishing services is a great way to restore life into your old, worn or damaged bathtub. In short this is a specialty coating (not epoxy paint ; Not Urethane Paint) that is chemically bonded to the old surface that makes the old look new again! I use fluoropolymer coating (made for the bathtub and tile refinishing industry) This process works on Fiberglass, porcelain, acrylic and Cultured Marble bathtub surfaces. Allowing the customer to enjoy many, many years of additional service from their bathtub without the need for costly and messy tear outs. Exact Quotes over the phone with a picture. No add on sales after I arrive. No high pressure sales. You will know the exact price before I arrive! (I HATE the silly bait and switch games that are played in the home service Industry!) I will give you an Iron clad price with literally the best coating on the Market and specifically for refinishing! Most standard size bathtubs can be completed in about 2 to 3 hours! Any residual odors will dissipate about 1 hour after completion and will be ready for use 24 hours after completion!
Please take a moment to see my pictures and information below!
Do you need an exact quote? Please send a picture of your project requesting a quote to : 972-391-7994
Dallas Bathtub Refinishing services is a great way to restore life into your old, worn or damaged bathtub. In short this is a specialty coating (not epoxy paint ; Not Urethane Paint) that is chemically bonded to the old surface that makes the old look new again! I use fluoropolymer coating (made for the bathtub and tile refinishing industry) This process works on Fiberglass, porcelain, acrylic and Cultured Marble bathtub surfaces. Allowing the customer to enjoy many, many years of additional service from their bathtub without the need for costly and messy tear outs. Exact Quotes over the phone with a picture. No add on sales after I arrive. No high pressure sales. You will know the exact price before I arrive! (I HATE the silly bait and switch games that are played in the home service Industry!) I will give you an Iron clad price with literally the best coating on the Market and specifically for refinishing! Most standard size bathtubs can be completed in about 2 to 3 hours! Any residual odors will dissipate about 1 hour after completion and will be ready for use 24 hours after completion!
Please take a moment to see my pictures and information below!
Do you need an exact quote? Please send a picture of your project requesting a quote to : 972-391-7994
Your support for small businesses in this difficult time is very much Appreciated! Even if you don't choose me ... Thank you for choosing a small business. I am an Owner / Operated bathtub refinishing business in Dallas TX. I have more information along with pictures and videos below. I service Dallas and parts of Fort Worth. You will find me to be honest, professional and very friendly. I started my business in 1991 (senior year of high school) went full time in 1992 after Graduation! I bring that experience to every job I do!
Thank You!
Dallas Bathtub Services
Thank You!
Dallas Bathtub Services
Dallas Bathtub Refinishing Answers Questions You May Have
Dallas bathtub services knows the terminology can be confusing. Bathtub refinishing also called bathtub reglazing and bathtub resurfacing is so much more than simply painting a bathtub. In fact, for residential quality bathtub refinishing the new surface is a much more durable multi resin polymer glaze made specifically for bathtub, tile and shower refinishing. It is NOT D.I.Y. epoxy paint! I give an up front quote with no hidden fees and no tax. Plus a 5 year Limited warranty! It will be correctly refinished with silane molecular bonding agent to chemically weld the water proof coating (not water resistant paint) into the pores of the old surface integrating the two surfaces together! This not the Epoxy paint that is common with apartments and motels. You will save Thousands of dollars versus replacement. Dallas Bathtub Services prices are similar to the epoxy painting prices because I am owner operated.
See my Frequently Asked Questions Page. You can also send a picture of the item needing refinished for an exact quote 972-391-7994 or email me at DallasBathtubServices@gmail.com (I never keep your info or bother you in the future)
Bathtub Refinishing Dallas
- Why do some refinishers use Epoxy or Acrylic Paint? -- There are several reasons Availability and pricing is a sure bet. Epoxy and Acrylic paint both have water resistant properties. However, Fluoropolymer is Water Proof. Epoxy and Acrylic Urethane paints can be thinned with cheap thinning agents like Lacquer thinner that is readily available for $14/Gallon or less (contains silicone and other filling agents that make the paint brittle and weak in areas). Fluoropolymer is a specialty coating that uses it's own thinning agents replicating the look of porcelain with a synergistic process. It takes practice to apply correctly, it takes many hours of application to apply the correct film strength and it takes a knowledge of how to bond to individual substrates like porcelain, cultured marble, formica, fiberglass and plastic because it is not a simple 1 part part to 1 part hardening agent ratio like paint is. Leave the Epoxy and Acrylic Paint for Apartments! Your home deserves the best coating that provides excellent bonding and gloss retention!
- Fluoropolymer - water proof, Chip resistant, will not turn chalky, grow mold or mildew, seals off lead from old worn bathtubs so they are safe again! Made for Bathtub and tile refinishing! Fumes will dissipate about 1 hour after completion! NO LINGERING ODORS!!
See my Frequently Asked Questions Page. You can also send a picture of the item needing refinished for an exact quote 972-391-7994 or email me at DallasBathtubServices@gmail.com (I never keep your info or bother you in the future)
Bathtub Refinishing Dallas
Let's discuss what Bathtub Refinishing Is and What You Can Expect From Dallas Bathtub Services
Below you will find just some quick points to let you know how Dallas Bathtub Services works and how much I appreciate your business!
- The old surface will be sanded or stripped back
- The surface will then be etched to create microscopic pores all over the surface.
- A bonding solution with high quality silane (Yes there are high and low quality silane bonding agents. I use a 7 part mixture bonding silane undiluted) will then be applied to every square inch of the old surface using overlapping motion.
- Silane is an expensive and VERY important step in the refinishing process (read more about this below)
- It is now time for an epoxy bonding agent to be applied. This created a chemical and mechanical bond for a long lasting durable new bathtub, shower or tile surface.
- Low V.O.C green label fluoropolymer is now applied using a specific pattern to bond to the old surface! This will give your bathtub, shower or tile the high gloss, new look that turns the old into new again!
Let Dallas Bathtub Services get your Bathroom Gorgeous
If your bathtub or shower is looking worn, discolored or just uglied out then please let me help with a very affordable option! Not only will you find my refinishing affordable but being owner operated means a subcontractor is not coming into your home, it will be me and I care about your home, I care about the quality of my work and I know that reflects on my company! When we set your appointment time I do my very best to arrive 15 minutes early.
Let's Answer (4) Questions you must have... right off the bat!
- What is included with the Dallas bathtub and tile or Shower refinishing Process?
- How Much is it? No low-ball sale prices, INSTEAD Honest sale prices that won't go up after I arrive!
- Does it Last? (YES! chemically bonded with high quality silane) With proper care! .
- Do all refinishers use the same products? (No! Learn more below)
Are You Ready To Instantly Update Your Bathroom?
- Works on Cultured Marble | Fiberglass | Porcelain |Cast Iron| Stainless Steel | Acrylic and more!
Bathtub Refinishing Dallas TX Owner Operated
Owner / Operated means my overhead is low so I can save you money on high quality bathtub refinishing! As a Homeowner you want a permanent surface. This is why I use the molecular bonding of high quality Silane (also used in the Dental industry) molecular bonding agents finish coated with copolymer infused with silicone resin and polyester resin and why it is the ONLY way to properly refinish a surface! So you don't end up with a peeling mess from inferior paints like epoxy and aliphatic acrylic urethane. If your not interested in reading but just want prices and contact information then please click F.A.Q. I am an owner operated business I am providing the best coating and process on the market, completing the work myself at the very best prices I can give to make a living and give top quality coatings and results. I do no upselling and low ball pricing just to get in the front door. You will find me to be honest, transparent, very friendly, professional and I never rush a job. Your not just another job to me! Bathtub, Shower and Tile refinishing is all I do! I am not a "jack of all trades" and I do Residential work only. My specialty is Bathtubs, fiberglass, cultured marble and acrylic, tile, showers and shower pans. (please take a minute to read about refinishing)
Is Bathtub Refinishing And Painting The Same Thing? No... Here Is Why
- 1.) What's Included and How Is Our Process Different?
- First I never use Epoxy or Aliphatic Acrylic Urethane Paint. Please understand, Refinishing is a synergistic process that involves etching the old surface (without dangerous acids), Silane molecular bonding agent and the correct finish coat that is for bathtub, shower and tile refinishing.
- Copolymer coatings infused with silicone and polyester resin made for bathtub, shower and tile refinishing. They are superior in every way to standard aliphatics and two part polyurethanes and Epoxy Paint. Here are a few reasons to choose the finest coating in the industry. VOC compliant, non toxic, inert, and USDA approved • • Will NOT allow algae, moss, mold, mildew, algae to grow • Prevents rust & corrosion • Abrasion resistant • Stain Proof • Extends the life cycle of products • Long term solution with a life expectancy of 20 years [Even though this finish coat is what you see and must be of the highest quality... alone it still is not enough]
- Silane ... High Quality Silane molecular bonding agent is a very, very crucial step for longevity! Combined with fiberglass resin on select surfaces.Silane is activated by moisture. When you use hot water on the new surface condensation forms on the back side of the coating. This is exactly why we see so many painted tubs rupture and peel. High quality silane is about the same price as the finish coat so unfortunately it is skipped by those looking to increase profits or simply don't understand the importance of the extra cost associated with proper refinishing. As the condensation forms on the underside of the new surface the silane is activated and chemically welds the new and old surface together creating a permanent bond.
- You will get a like new surface for a fraction of the replacement cost!
- 2.) How Much Is It? Save over 75% Versus Replacement!
- Sale Prices Going On Now!! Owner/Operated = I do all work myself. No Day Laborers, No Sub Contractors. Best Price for the highest quality products because my overhead is LOW.
How Long Does Bathtub, Shower And Tile Refinishing Take?
A standard size bathtub refinishing will take about 3 hours to complete and be ready for use the following day! Because of the epoxy paint used in the 1990's and sadly still used by some refinishers and D.I.Y. kits. There is a common misconception that bathtub refinishing takes 3 days to cure and will peel off within a few days. This is why being knowledgeable about the refinishing process is so important for the consumer! You will save so much money by refinishing versus replacing that shopping around for a low ball price will be a major downfall! Bathtub, Shower and Tile Refinishing is a permanent solution when the correct products and steps are used. Being an owner / operated business I am able to promise those correct steps are used because I personally do each and every job! I also keep my prices low because I do the work myself instead paying sub contractors a percentage. The consumer needs to be aware that while other refinishers use paints that are water resistant such as epoxy and acrylic urethane. Dallas Bathtub Services uses only water - proof copolymer finish coats infused with polyester resin. Learn about the specifics of different surfaces As mentioned above only the highest quality silane molecular bonding agent is used under the finish coat and silane is also used between each of the 9 - 12 finish coats applied! Dallas Bathtub Services
Bathtub, Shower, Tile, Shower Pan Refinishing Dallas TX
Bathtub, shower, shower pan and tile refinishing in the Local Dallas,Tx. area! My service areas include the areas surrounding Dallas including Arlington, Mesquite, Dallas, Garland, Richardson, Forney, Plano and surrounding areas. Residential Quality means it has to be done right! It has to Last! Silane bonding agents applied before the fluoropolymer finish chemically welds the new surface in place! Bathtub Refinishing Dallas
- Dallas Bathtub Services uses Silicone Injected copolymer it is NOT like Epoxy or Aliphatic Acrylic Urethane paint. Instead it is the actual coating recommended for bathtub, tile and shower refinishing!
- High quality silane (used in the dental industry for porcelain fillings and other bonding applications. What goes under the coating is just as important as a quality surface! Silane is used by the dental industry for bonding and repairing because it bonds on a molecular level. Silane is activated by moisture allowing it to form a chemical weld between the old surface and the new coating.
- So when you you use the surface with hot water the condensation that forms between on the back side of the new surface activates the high quality silane causing it to chemically weld the two surfaces together. Having a high quality silane is crucial! Having a high quality fully water proof (not water resistant) finish coat is equally as important! Silane is a molecular bonding agent (used in the Dental Industry for bonding porcelain). High quality silane works by created a chemical weld between the finish coat and the original surface. When hot water is incorporated during the use of the surface it forms condensation between the new and old coating. High quality Silane is activated by moisture so when the surface is used it becomes even stronger. The quality of silane is reflected in the price and is as expensive as the copolymer finish coat. It will never be seen by the customer so unfortunately most refinishers skip this crucial step. Refinishing is much more than a specific coating, it is a synergistic process that depends on each step to be correctly completed.
- 5 year Limited Warranty Included!
- Owner / Operated which means you have the owner doing the work bringing the experience I have gained since 1992.
- I do not use sub contractors or Day laborers.
- I live and work in the Dallas area!
Bathtub, Tile, Fiberglass, Cultured Marble, Acrylic Refinishing
Bathtub Refinishing Dallas TX F.A.Q.
My promise to you is Honesty, Respect, Professional attitude! No sales gimmicks. I use Fluoropolymer coatings with very high quality Silane molecular bonding agents. Multiple coats are applied using an H.V.L.P. applicator. I arrive on time, every time! The photos and videos on this site are mine (not stock photos). I do not use Sub Contractors... I am an Owner / Operated Business so I Do All Work Myself.
Bathtub Refinishing Dallas Is Owner Operated
Thank You! For allowing me to do what I love since 1992! I still complete all work myself!
- In the bathtub refinishing Industry very few companies have employees that refinish. They hire sub contractors and day laborers. I'm not going to do that! I will be the only person coming into your home! Owner / Operated.
- What is the benefit of hiring a company with 20+ years of experience if the person doing your refinishing work only has 1 day of experience?
- Residential Quality Bathtub Resurfacing. This is NOT Epoxy paint!
- No cheap Paint. No spray can adhesion promoter can be used!
- NO Epoxy paint, Automotive lacquer, oil based paint or Acrylic Urethane! I have these and more used on tubs and tile and they fail every single time! Many times within weeks! Even if you don't chose me that's okay... but please understand quality coatings and the silane molecular bonding agents are the key to a long term restoration process that you can enjoy for years to come!
- Are You Ready To Instantly Update Your Bathroom?
- No Games - Gimmicks - No Tax - No Hidden Fees!!
- Tub and Tile Surround refinishing
Bathtub Refinishing Dallas Gives You A Permanent Surface
You will get a permanent surface for the solution to worn, outdated or damaged bathtubs, tile, showers, sinks and vanities. Let me show you the difference. Because Surprisingly most consumers pay for bathtub painting or use a bathtub painting D.I.Y. kit thinking it is bathtub refinishing. Even if you don't choose me PLEASE let me explain the differences so you can make an informed decision.
- While other refinishers are using inferior paints like epoxy and aliphatic acrylic urethane, which are water resistant. I use not only an etching system to prepare the surface, but also a high quality silane molecular bonding agent to chemically weld the new surface into the old surface. This is followed by a top coat of Factory Kohler white silicone injected fluoropolymer water proof coating. This creates a long term solution to the old, worn, discolored, damaged or simply uglied out surfaces!
Bathtub painting this is not what Dallas bathtubs services does. what is Silane? FluoroCoPolymer Coating? Please just know that Epoxy Paint and Acrylic Urethane paints are water resistant NOT Water proof, My coatings are FACTORY colors and made for Bathtub, Tile and Shower refinishing They are water proof coatings.
- My Pictures and Content are 100% mine.
- I pledge to remain professional and courteous to both Customers and Competition. I will NEVER 'put down' another persons work. I will NEVER share customer information or ask you to refer me to anyone.
- You will not find stock images on my site!
- My Images are mine. Work completed personally by me.
- All Videos are mine, work that I personally completed.
Bathtub Refinishing Dallas TX All Inclusive
#1.) Bathtub Refinishing Dallas What Is Included?
- Chemical wash to dissolve and remove soap and oil residue.
- Etching of the old surface using a spun-fiber disc that operates at 2,600 RPM.
- Molecular bonding agent using nano technology hand rubbed into the pores opened through the etching process. This allows the bonding agent to not only bond on the surface level but to penetrate the pores and bond beneath the surface!
- (9-12) coats of finish coat with the correct additives customized to the surface it is being applied to (crosslink additives are resins such as fiberglass resin, polyester and silicone. These can be used together added into the copolymer formula or they can be added individually and in specific increments to suite the original surface like cultured marble! Fiberglass, Acrylic, porcelain, cast iron, steel and porcelain can all be refinished with a permanent Copolymer synthetic porcelain surface) NOT EPOXY or ACRYLIC URETHANE PAINT
- The final result is a gorgeous, like new bathtub, tile or shower surface! Warranty included. (Not an add on sale like other refinishing professionals) That is the Dallas bathtub refinishing difference.
- You now have a Long Term Solution to the worn, discolored or damaged surface with a realistic life expectancy of normal use with care of over 20 years!! (With proper care)
- This is a Limited Time only for the sale. Recaulking is included. There is nothing else to buy! It takes less than a day to complete in 99% of the cases and will always be ready for use the very next day!!
Bathtub Refinishing Dallas TX Uses Crosslinking
What Does Crosslinking Mean

Crosslinking of polymers is a process where polymer chains are connected to each other These chains are caused by incorporating heat and allowing the polymer molecules to "link" causing a very, very strong bond.. The basics of how organic peroxides are used in the crosslinking of polymers typical examples of cross linked or (vulcanized) plastics and rubbers are shoe soles, underground and under sea cables (Imagine the harshness of the sea and the reliability that is a must.) Also timing belts and radiator hoses in cars and pipes. This is why technology has advanced in the field of Copolymer coatings. No longer is the Tub and Tile refinishing Industry A quick fix painting service. Tub and Tile Refinishing, Dallas bathtubs when correctly completed using the synergistic approach of multiple steps and correct thickness is a Long term Solution!
Bathtub Refinishing Dallas TX
Bathtub Refinishing Dallas TX
Bathtub Refinishing Dallas TX
No extra charge for weekend Appointments. Saturday and Sunday both. I work 7 days a week.
Residential Quality
Never Be Charged a penny more than your quote! I Promise!!
Are you Familiar with Bathtub Resurfacing? Please don't confuse Bathtub Painting with Epoxy with real bathtub refinishing. by Dallas Bathtub Services I am an owner operated business
- NO EPOXY PAINT
- NO Yellowing with age
- NO Peeling with age
- Long term solution
- I offer Owner / Operated Prices with NO up selling and NO SALES GAMES!
- Green remodeling because I keep your original fixtures out of the landfill.
Bathtub Refinishing | Bathtub Resurfacing
No Peel. No Loss of Gloss. Failure is not an option!™
NO EXTRA FEE FOR CREDIT CARD PAYMENTS.
Learn the difference between bathtub painting and bathtub refinishing and you will learn why the real bathtub refinishing professional would never use paint, epoxy or Aliphatic Acrylic Urethane Paint. We use copolymer coatings Which is still only a portion of the synergistic approach!
Bathtub refinishing Dallas seals away lead | shower | tile | One Day Completion | no bathtub painting | etching | molecular bonding | 972-391-7994
Dallas Bathtub Services Refinishing Questions and Answers
Ask about having your Vanity Refinished at the same Time as The Bathtub. If you choose white I will quote you a HUGE discounted price and it upgrades the cultured marble finish ten fold! Cultured marble will need fiberglass resin learn more! No more surface cracks in the sink bottom!
I know you are like me and other home owners. You want a great job and you want to be fair on paying. However, you also don't want to overpay!
Dallas Bathtub Services is owner operated. This means you get my experience (that first started my senior year of high school in 1991) working on your refinishing project.
Even if you think your bathtub is a simple bathtub refinishing project and it looks to be in pretty good condition but you just want to restore the new look and gloss. It still has to be etched, chemically treated with high quality silane and then finish coated with the correct water proof coating to mimic the look and feel of porcelain. Dallas Bathtub Services
I know you are like me and other home owners. You want a great job and you want to be fair on paying. However, you also don't want to overpay!
Dallas Bathtub Services is owner operated. This means you get my experience (that first started my senior year of high school in 1991) working on your refinishing project.
Even if you think your bathtub is a simple bathtub refinishing project and it looks to be in pretty good condition but you just want to restore the new look and gloss. It still has to be etched, chemically treated with high quality silane and then finish coated with the correct water proof coating to mimic the look and feel of porcelain. Dallas Bathtub Services
How about considering making the old look new again? Dallas Bathtub Refinishing has several specials and with my up front pricing you can be assured there are NEVER any hidden fees!
Bathtub Refinishing In The Dallas Area
Dallas Bathtub Services is an owner / operated company and services the Bathtub, tile, Sink and Vanity refinishing needs of the Dallas Texas area. I am an owner / operated business that has been servicing the Dallas Area since 1992. I have a completely clean background, Insured and take care of my customers personally. I chemically weld the new surface into the old, not on top of the old. Which involves etching the surface, Hand rubbing the Molecular bonding agent into the exposed pores and microscopic scratches then applying copolymer finish coat infused with silicone and polyester resin as the final coating for most all house hold surfaces.
Because I care about your home, your Family, your pets and health I use the Low V.O.C Made in America copolymer as recommended for bathtub, shower and tile refinishing! Also I will use a fiberglass or vinyl cross link when needed under certain circumstances such as a Fiberglass or cultured marble bathtub. This will allow the bathtub to flex without cracking the new surface. Other Refinishers want to use a one product fits all mentality and they don't realize the old surface on fiberglass and Acrylic will give and flex. If the same product that was used on a cast Iron Bathtub were used on a Fiberglass Bathtub, Cultured Marble Bathtub or even an acrylic bathtub for that matter it would crack and fail rather quickly. Dallas Bathtub Services
Because I care about your home, your Family, your pets and health I use the Low V.O.C Made in America copolymer as recommended for bathtub, shower and tile refinishing! Also I will use a fiberglass or vinyl cross link when needed under certain circumstances such as a Fiberglass or cultured marble bathtub. This will allow the bathtub to flex without cracking the new surface. Other Refinishers want to use a one product fits all mentality and they don't realize the old surface on fiberglass and Acrylic will give and flex. If the same product that was used on a cast Iron Bathtub were used on a Fiberglass Bathtub, Cultured Marble Bathtub or even an acrylic bathtub for that matter it would crack and fail rather quickly. Dallas Bathtub Services
Bathtub Refinishing Dallas TX Services
Dallas bathtubs not only penetrates the old surface to bond a new surface into the old but Dallas bathtubs also now uses a liquid spray in bathtub liner that integrates the new surface into the old surface. Dallas bathtubs will apply a molecular bonding agent. Dallas bathtubs uses a synergistic approach to melt into the new surface now applied and chemically welds an additional (9) coats of Synthetic Porcelain into, not on to the old surface. Bathtub Refinishing Technology has changed over the last several years and Dallas Bathtub Refinishing has been at the forefront of the technological advances throughout our (22) year career. If you are in the Dallas,Tx. area let Dallas Bathtubs Refinishing help you do your project right the first time!
Dallas Bathtubs Refinishing Etches into the old surface, not on top of the old surface.
Dallas bathtub refinishing is an owner / operated business and I will be the one coming out to do the work myself.
What a true blessing the Dallas area has been to me!
Bathtub refinishing and bathtub painting are two completely different things. Often consumers are tricked into thinking bathtub painting with Epoxy paint is actually refinishing. This is why I offer True Dallas Bathtubs Refinishing. The truth is Bathtub refinishing is a process that should be left to the professionals. Professional refinishing is achieved through etching the old surface, this exposes pores in the old surface, A silane bonding agent is then applied so when the finish coat is applied the new surface is bonded to the old surface.
Bathtub refinishing Dallas takes this process and expands on the basics. I etch the old surface with both chemical and manual etching so the exposed pores are on every square inch of the surface. I then use molecular bonding agent. It creates a permanent bond! This molecular bonding agent is hand rubbed into the exposed pores and over the entire surface. It has a chemical reaction with the synthetic porcelain that is applied with an H.V.L.P. sprayer (high volume low pressure) this is like an airbrush on steroids so get a great shine with no brush or roller marks! Dallas Bathtubs Refinishing
See my Dallas Bathtubs refinishing prices, testimonials and take a moment to educate yourself about the refinishing industry! Bathtub Refinishing, Dallas, Mesquite, Garland
Bathtub refinishing Dallas takes this process and expands on the basics. I etch the old surface with both chemical and manual etching so the exposed pores are on every square inch of the surface. I then use molecular bonding agent. It creates a permanent bond! This molecular bonding agent is hand rubbed into the exposed pores and over the entire surface. It has a chemical reaction with the synthetic porcelain that is applied with an H.V.L.P. sprayer (high volume low pressure) this is like an airbrush on steroids so get a great shine with no brush or roller marks! Dallas Bathtubs Refinishing
See my Dallas Bathtubs refinishing prices, testimonials and take a moment to educate yourself about the refinishing industry! Bathtub Refinishing, Dallas, Mesquite, Garland
Dallas Bathtubs Refinishing NEVER uses the brush and roller system of bathtub painting that others try to call bathtub refinishing. Anytime you simply paint on top of an old surface, especially when that old surface is like a bathtub or tile surround. You can not expect the paint to last very long. It's Equivalent to painting GLASS, then expecting it to last.
This is why Dallas bathtubs is so much more than bathtub painting. This is true on any surface that involves Dallas bathtubs or tile because each surface offers a unique challenge. Here are a few examples:
This is why Dallas bathtubs is so much more than bathtub painting. This is true on any surface that involves Dallas bathtubs or tile because each surface offers a unique challenge. Here are a few examples:
- Porcelain bathtub Refinishing - This surface would be equivalent to trying to paint glass. It is fired in the factory and has a cast iron core but is coated in porcelain then baked. This surface would be refinished by first scrubbing the entire surface with a chemical cleaner to melt any type of soap residue and oils that may be invisible to the naked eye but will be disastrous to the refinishing process. Next the surface is etched using a mechanical etching tool, NEVER using the very dangerous acids of years ago. Another chemical rinse is done to make sure I have cleaned up all areas thoroughly. Now is the molecular bonding agent. This first molecular bonding coat is then hand rubbed and worked into the microscopic scratches and pores that were caused by the etching process. Now it is time to apply the first coat of the Fluorocopolymer coating on the surface. This first coat melts into the molecular bonding agent so it penetrates beneath the original surface and with a combination of several more bonding coatings and finish coatings of synthetic porcelain the proceed to melt into the prior coating. With a hard surface such as porcelain bathtubs and tile I will use a liquid glass additive in the copolymer coating so it cures to a hard glossy finish. Mimics the Look and Feel of Porcelain!!
- Fiberglass, Acrylic, Cultured Marble - These surfaces all have (2) things in common, They flex (which is why they crack) and they all contain fiberglass. Not only will the refinishing repair the cracks but adds a lot more strength to the original surface. So when repairing these surfaces and refinishing these surfaces it is best to use a fiberglass resin additive to the synthetic porcelain. They will be cleaned and etched just like porcelain. However, we want to take advantage of the fiberglass resin so the new surface will flex with the old surface. These surfaces will still be finished off with the liquid glass additive in synthetic porcelain. However, since we are making the new surface an integral part of the fixture we will still allow it to flex when under pressure so the new surface does not crack like the surface does when a (one coating fixes all) system is used.
Bathtub Refinishing Dallas Pictures
The funny part is I thought the tub had been painted green and the white was showing thru. No, The tub was actually green and it was painted white at some time in the past! Dallas Bathtub Refinishing
Bathtub Refinishing, Dallas
|
Dallas Bathtub Services: Surfaces that can be refinished by Dallas Bathtub Refinishing:
- Cleaning Directions can be found under the price list
- Dallas Porcelain Bathtub Refinishing
- Dallas Acrylic Bathtub Refinishing
- Dallas Fiberglass Bathtub Refinishing
- Dallas Tile Refinishing
- Dallas Porcelain Refinishing
- Dallas Vanity Refinishing
Bathtub Refinishing was first recognized in the 1930's. Most of the bathtub,tile,shower refinishing work was completed in the more crowded areas of the United States such as Chicago. In Fact in Chicago you will see bathtub refinishing trucks and vans as much if not more then you see carpet restoration vans here in the Dallas,Tx. area.
The reason behind this is because of the amount of work and expense that is associated with replacing a bathtub. A quick trip to any home improvement store will reveal the actual price of a bathtub is only a few hundred dollars. This is just the beginning of the cost associated with bathtub replacement. Bathtub replacement will involve a plumber, then the removal of at least two rows of tile surrounding the tub because of the lip around the tub to prevent water leaking behind the tub. Then the mathematics of 'will the old tub go out thru the door and hallway'. More importantly, will the new bathtub fit back in? As you can quickly realize after just touching on a few of the issues with bathtub replacement you will quickly understand why bathtub refinishing is a very cost effective and time effective solution. Most all bathtub refinishing can be completed in a single visit. Dust and construction mess is virtually non existent and my flat rate bathtub refinishing Dallas area prices means you will know the exact price to budget!
The reason behind this is because of the amount of work and expense that is associated with replacing a bathtub. A quick trip to any home improvement store will reveal the actual price of a bathtub is only a few hundred dollars. This is just the beginning of the cost associated with bathtub replacement. Bathtub replacement will involve a plumber, then the removal of at least two rows of tile surrounding the tub because of the lip around the tub to prevent water leaking behind the tub. Then the mathematics of 'will the old tub go out thru the door and hallway'. More importantly, will the new bathtub fit back in? As you can quickly realize after just touching on a few of the issues with bathtub replacement you will quickly understand why bathtub refinishing is a very cost effective and time effective solution. Most all bathtub refinishing can be completed in a single visit. Dust and construction mess is virtually non existent and my flat rate bathtub refinishing Dallas area prices means you will know the exact price to budget!
Bathtub Refinishing
I have seen this more in 2018 than I have in the past several years!
- First, you need to understand that bathtub refinishing is not painting a bathtub. I have seen more bathtubs and tile painted in 2018 than I have in the last several years. (One job the customer admitted they had considered me 2 months earlier but went with a cheaper price) I promise I understand! However, I need to explain why prices are set the way they are.
- Instead of looking for quality... some professionals are looking to cut cost and raise profits! I am seeing everything from lacquer automobile paint to the D.I.Y. epoxy paint kits being used! I use the correct synergistic process... And I do the work myself!! Dallas Bathtub Services
- Epoxy paint, lacquer automotive paint, oil based paint... I have seen it all. Why throw away money on something that is going to only last a few weeks or months at best! The question is not "If it is going to peel?" But rather "How soon is it going to peel?"
- The fact that paint goes on top of the old surface has more blame, the key word being paint! Also to blame are the cheap lacquer thinners! So many times instead of purchasing the specialty thinner designed for correct coating Lacquer thinner is used because.... well, it thins the coating and it's half the price of the correct thinner. (Correct being the key word here) See, it's not about making something look pretty good (that's not hard to do) ... it's about trying to duplicate a factory finish and provide years of service! Lacquer thinner contains silicone and other fillers that leave the coating brittle in areas.
- Etching the old surface opens pores and creates microscopic scratches. This crucial step is being dismissed for the sake of time. (New methods want to bond with epoxy paint primer).... I don't mind spending the extra time for a proven method!
- Silane is a molecular bonding agent developed by the Aerospace Industry! (used in the dental industry for bonding porcelain fillings) once again the quality varies from supplier to supplier with 100's available) High quality silane is worked into the pores of the etching process, and high quality silane is applied between coats to tie the coatings together. It is an expense and it is not going to be seen (so many will skip on this step)... yet the lack of it will surely show in a matter of weeks!
- So How is my refinishing completed? With Dallas bathtub refinishing services you will quickly see this is not a specific coating... it is a process a synergistic process that works together with each step being crucial to the outcome!
- First, I sanded and stripped back the paint that failed! Then I etched the old surface using a spun fiber disk rotating at 2600 RPM. Everything was then clean with tub and tile clean. After this Silane was hand rubbed into the surface before being refinished with a Copolymer coating that is infused with polyester and fiberglass resin for a superior gloss and then chemically welded into, not on top of the surface and tied with silane bonding agent between the 12 coats.This is Not Epoxy paint that yellows,dulls and fades and Not Alipahtic Acrylic Urethane paint like the others use! This dries to a non yellowing, ultra hard and chemically bonded surface that is expected to last 20 years before needing to be refinished again! It includes a limited warranty!