Porcelain Bathtub Refinishing Dallas

I understand the half truths and out right lies that cast a black cloud over our Bathtub Refinishing Industry. I can not help what is out side of my control but Bathtub Refinishing Dallas is where I work, Live and Raise my Family. I am part of the Dallas community and I want to do my part to educate prospects about Bathtub Refinishing Dallas. The first thing is please never mistake Bathtub Painting for Bathtub Refinishing. In the Dallas area you will find a vast number of so called Bathtub Refinishers. The problem is they are really Bathtub Painters and for Porcelain Bathtubs this is going to last about 3 uses if you are lucky. Why? Bathtub painting allows the Epoxy paint to be brushed or rolled on top of the old surface and rely on great cleaning preparation to get the Epoxy to stick. Then you allow (3) days to dry and maybe it will last a few days, a few weeks or even a few months. Bathtub Refinishing Dallas uses a different approach for Bathtub Refinishing. Bathtub Refinishing Dallas will etch the old surface causing microscopic scratches and expose the pores in the original surface so the new surface is melted into the old surface along with a bathtub refinishing coating called synthetic porcelain. This coating is applied with fusion lock, molecular bonding solution so the Bathtub finish is melted into that etched surface. The Bathtub Refinish is then Baked on using a heat applicator that reacts to a chemical in the synthetic porcelain that heats that surface to 2000 degrees while not heating up any other area around the Bathtub. This results in the Bathtub Refinishing Dallas system drying the ultra glossy bathtub, tile or shower refinished surface in only 4 minutes allowing you to use your new surface that very same day! 
Bathtub Refinishing Dallas

Fiberglass Bathtub Refinishing Dallas | Fiberglass Bathtub Repair Dallas

Fiberglass Bathtub Refinishing Dallas is a project that takes experience and science to master. Fiberglass Bathtub Surfaces flex when under pressure. If the Bathtub refinisher does not have the experience of dealing with fiberglass surfaces then the Bathtub Refinishing surface will dry too brittle and crack under stress. Bathtub Refinishing Dallas uses a fiberglass resin to melt into the old surface and after gently etching the old bathtub surface. This allows the new Bathtub refinishing coating to fuse the entire unit into one solid unit. This allows the new bathtub surface to flex with the old surface. However, you will notice the Bathtub surface will make the fiberglass unit much stronger then what you originally had and for that matter what you could purchase new at a bathtub retailer.
Bathtub Refinishing Dallas

Tile Refinishing Dallas. The Homeowner did not want the bathtub refinished, Just the tile changed from brown to white.