save money by refinishing

Dallas bathtub refinishing uses a 100% polyester coating that is glossy white and superior in every way to standard Epoxy and Acrylic Urethane paints. Polyester is low V.O.C and once cured does not emit v.o.c.'s making it harmless to indoor air quality Excellent chemical & abrasion resistance, plus color and gloss retention.
Once Cured coating equals the results of the best baked on Powder Coat finishes.
Dallas Bathtub Refinishing Services in Dallas TX

In the video  below you can tell I am frustrated. The surface is peeling off the tub in sheets. This had only been refinished by another company 6 months prior (the home owners said).

• 0:00 - 0:25 - that coating is flaking off by rubbing my hand over the non bonded, brittle surface.
  
• 0:25- 0:35 - using 2 fingers you see how I peel large pieces of the surface off. You can see I'm frustrated and my face is red from second hand embarrassment! This tub was not bonded and it was applied very dry! This tub had a 10 year warranty and they refused to correct it! Just a terrible dark cloud over our industry! The homeowners just wanted it done! 
  
• 0:35-057 You could see the difference they said. In other words the tub was not that glossy and smooth when it was completed by the other company. I used silane coupling agent to tie the old and new surface together. The finish coat is polyester top coat that forms a very hard surface.
  

Dallas Bathtub Refinishing

The process I use in a synergistic process the integrates the new polyester finish deep into the old surface. This is much different than typical refinishing that paints an Epoxy paint coating on top of the old surface.
In the video above we see how the Epoxy paint has failed in only a matter of weeks leaving the home owners and me frustrated (Almost 6 months They told me).
When you hire Dallas bathtub refinishing services to refinish your bathtub or tile you can expect the synergistic steps to work for you in the same manner as it has the thousands of other bathtub and tile restoration projects I have completed in the Dallas TX area.
You will find that the steps I use a combination of steps that build strength to the next step and all work together for an excellent finished product.

• Etching of the old surface accomplished with a spun fiber disc rotating at over 2600 RPM. Absolutely no harmful and dangerous acids are used.
• A molecular bonding agent that is hand rubbed into the pores and scratches caused by the etching process. This uses nano technology that bonds on a molecular level.
• H.V.L.P application of a base agent that includes the same molecular bonding agent that was hand rubbed into the pores of the old surface. This allows the entire surface to become a magnet ready to chemically the weld the finish coat both into and onto the new surface.
• The final major step is the application of the polyester finish coat. This is not an  epoxy paint it is far superior! This polyester surface was made specifically for the bathtub and tile refinishing Industry. Excellent chemical & abrasion resistance, plus color and gloss retention.
  Once Cured coating equals the results of the best baked on Powder Coat finishes.

Johnny Yarbrough
972-391-7994
[email protected]
Dallas Bathtub Refinishing

Each day I load my truck according to that days work load. This prevents the material from being subjected to our Dallas,Texas temperatures while being in back of the truck.
I have a climate controlled storage facility and also run a dehumidifier in that facility to control all aspects of the climate. This allows be to have the confidence of knowing I am doing the very best job for you and your family.
You are never just another job to me. I can say since 1992 virtually all of my friends were customers at one time. That is how we first started talking, we clicked and would end up going to each others homes ... inviting each other for dinner. See when you help a small business stay in business you are putting back into your local economy. Some contractors may not think of that in the same way I do but to me it is appreciated that I can make a living in the same area that live, work and play in. There is a great chance we will see each other at a store, restraunt or simply while driving. I take pride in the fact when I see a past customer I can shake hands and say "do you remember me".
Please take a minute to see my flat rate prices. Also keep in mind I never upsell, I never charge a different price than quoted and My refinishing is with synthetic porcelain that is integrated into the old surface. It simply can not peel! Dallas Bathtub Pros This is Not the old method of painting a surface with epoxy and using a brush and roller method.
Dallas Bathtub Refinishing |Bathtub Refinishing Dallas,Mesquite,Garland Areas

If you are looking for an updated bathroom in time for Christmas or if you are looking to give yourself or your family a GREAT Christmas gift then Dallas Bathtub Refinishing has the answer.
I offer a permanent Fix, not a painted bathtub, tile or shower but a properly refinished one instead.
Using state of the art etching to create pores in the old surface, hand rubbing molecular bonding agent not on top of the old surface but worked into the old surface. Then finish coated with synthetic porcelain and backed by a written warranty. You now have a new surface that is integrated into the old. No peeling like paint. No dull, painted look. Simply a glossy gorgeous surface that has the same life expectancy of brand new fixtures. My prices are flat rate and listed right here on my website! Dallas Bathtub Refinishing

Most of my customers will ask me what needs to be done to prepare for refinishing? They want to not only make my job as easy as possible for me but also want to obtain the absolute best results possible.
The truth is there are a few tips and tricks you can do and some information you should know to make the refinishing process go smooth and add years of life to the refinished fixture. Since I mentioned years of life, let me explain what is meant. This would be the period of time before the fixture would need to be refinished again. Please don't think once an item is refinished it is doomed. All we are doing is adding life back into the bathtub, tile, shower or vanity and giving it a like new appearance.

When having your bathtub, shower, tile or vanity refinished please remember any loose dust is not going to be a friend to the refinishing process. The best thing you can do the night before or the morning of is sweep the bathroom floor and vacuum any carpeting around the bathtub area. This will prevent air from making the dust airborne and settling on the newly refinished surface.
The great thing about synthetic porcelain is the top layer will flash dry very quick so keeping particles and dust off the prepared surface is the important part. Once it is refinished the surface will cure within minutes (unlike the epoxy kits that stay tacky for up to 3 days according to the manufacturer).

I know some of my customers want to know what to expect when the refinishing process begins. There will be a couple of variations that depend on the type of surface being finished. In other words cultured marble, plastic, acrylic and fiberglass will sill be etched but it wont be etches by the same means as Porcelain or ceramic tile.
However, the important thing to know is I will mechanically etch the surface and never use any kind of harmful acid like what was used in the old days of bathtub refinishing.
You can also expect me to be in a good mood, joyful and appreciative of the work.

After the surface is etched I will use a machine called an H.V.L.P. sprayer. It is designed for no dust spraying. It is a fine finish sprayer and allows me to control the air pressure which is usually set at 2pounds. Very low air pressure that applies a high volume of coating is like an airbrush of sorts. It allows my to apply the molecular bonding solution in an even layer then using small circular motions it is hand rubbed into the open pores caused by etching of the old surface.

Today's Bathtub Refinishing Took me out to Irving,Tx. The lady had two bathtubs she wanted refinished and both in the color Bone. I thought this would be an excellent opportunity to show how not only lighting, but the tile that surrounds the bathtub can lend to the actual color of the Bathtub. As I mentioned both of the Bathtubs below were refinished from not only the same exact color batch but I mixed enough material for both bathtubs so the mixture did not change whatsoever from one bathtub to the other. Bathtub Refinishing Dallas

Bathtub refinishing is a great way to seal off the Dangerous lead that can leach into your bathwater. Especially vulnerable are children with less body weight so the parts per million of lead is more poisonous and children love the extended play time that bath time usually brings. With this play time it makes sense that children will put their hands in their mouths and not only contact lead through the skin but actually ingest this unintentionally.
   Please understand, I'm not trying to scare you or make a mountain out of a mow hill. However, the public needs to be educated about the potential lead poisoning from worn or damaged porcelain bathtubs. I urge you to NOT take my word for it but simply go to youtube and search bathtub lead poisoning. Among the other videos you will find a 60 minutes investigative report that tells of a Family that had to overcome their children's lead poisoning and it was found that the bathtub was the cause.  ( I linked the video below)

If you watch the video you will see exactly what I am speaking about.
The important thing to remember is that the lead can be sealed safely away by a professional bathtub refinishing technician. The synthetic porcelain coating is a great remedy to make your bathtub look great, update your bathroom and most importantly keep your family safe! Bathtub Refinishing Dallas

Bathtub Refinishing, Arlington in Dallas County - Today I was able to help out a family that literally had to have the bathtub refinished but they were being quoted huge prices by other companies to strip the old epoxy off the bathtub. The man contacted me and simply said "I don't have the money to pay an extra $250 on top of the refinishing cost to strip all the old bathtub paint off". The bathtub had to be refurbished to pass inspection and like most of us the man was on a budget and had a Family. I understood! I knew stripping that tub would take about an hour extra so we worked out a day that was slow for me and worked out for him so I could spend the extra time and not be rushed. I have posted the Before / After pictures below. He was very appreciative and I not only was able to leave him with a product that looked great, but a bathtub that will give him years of great looks and service. I also appreciated the work and his willingness to work with me so I could refinish his bathtub on a day that I normally would have nothing to do. It was a win, win situation for both of us.
    If you notice on the pictures below the old paint was yellow. That is a sign of epoxy paint. It will yellow when bleach is used on it. Which is one of many reasons the bathtub refinishing industry stopped using epoxy paint years ago! It is cheap. However, It also looks "painted", it will yellow when bleach is used on it .... and bleach is in almost all bathroom cleaners that I know of. I applied synthetic porcelain to the bathtub and instantly updated the bathroom for him within about 3 hours.

What a blessing today was. I met a Gentleman that was rehabbing a gorgeous home and he had already installed cabinets, Bathroom vanities and new tile .... Then he seen how ugly the bathtub was compared to all of that. He called to have me refinish the bathtub so it too would look new!
 It was a great day and I appreciated the work along with the conversation!

Bathtub Refinishing is one of those services that you never really know what your going to get into until your are there. I am honestly proud of the fact that never have I charged more for a job then the original quote was for. Which is why I complete the bathtub refinishing, tile, shower and bathtub vanity refinishing projects myself. There are times that it may look like a small rust spot on a bathtub, once I start to sand the spot it quickly flakes away revealing an area sometimes triple the original size. I have even had rust areas that had completely eaten through the bathtub. The good news it can be repaired and it can look great and last! 

The pictures Below Show the same bathtub. The first two are before the next two are after and the final two are after with the flash on. I posted it this way so you can see how the lighting effects the bathtub color.

Bathtub Refinishing is a great way to make the old, worn, outdated bathtub, tile and shower fixtures look new again. However, Bathtub Refinishing can also repair damage, rust, holes and other issues to prevent bathtub replacement.